Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Chevrolet Uplander

Model: Chevrolet Chevrolet Various
Part: Key

Thanks to the rather minimal design of your Chevrolet Uplander key (2005-2008), replacing the battery inside is particularly simple and quick. Below, you will be guided step by step so you can complete the operation without any difficulties. First, obtain a new battery (CR 2032) and a small flat screwdriver. Then, use the screwdriver to open the cover. Once done, replace the old battery with the new one and correctly reassemble the previously removed back cover.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Chevrolet remote control
Chevrolet Chevrolet Various Replacing the battery of the Chevrolet vehicle remote control is a simple and quick operation to be carried out independently. To replace the battery…
How to change the battery of the Chevrolet remote control
How to change the battery of the Chevrolet remote control
Chevrolet Chevrolet Various For the replacement of the battery of a Chevrolet vehicle key, we need to perform very simple and quick steps. The first step is to remove the top pa…
Where to Find the Engine Fuse Box of the 1999 Chevrolet S-10
Where to Find the Engine Fuse Box of the 1999 Chevrolet S-10
Chevrolet Chevrolet Various In this mini guide, we will discover where the engine fuse box of your 1999 Chevrolet S-10 is located. First, turn off the vehicle and open the front…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos