Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Fuses on a Chevrolet Spark

Model: Chevrolet Spark - Years 2009-2018
Part: Fuse box

What to do when the electrical system isn't working properly? Check if any fuses have blown in the fuse box. Lift the front bonnet and locate the fuse box. Remove the plastic cover that protects the fuse box. Inspect the damaged fuses; replace them using tweezers or needle-nose pliers. Once this is done, insert the new fuses into their designated slots in the fuse box. Close the fuse inspection box with the plastic cover, and test the correct functioning of all electrical systems by turning on the ignition with the key.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Chevrolet Spark?
Where are the fuses located in the Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) The fuses of the Chevrolet Spark are located inside the appropriate fuse boxes installed in the car: in this type of vehicle, you will find two boxes…
Where is the fuse box on a Chevrolet Spark M400?
Where is the fuse box on a Chevrolet Spark M400?
Chevrolet Spark (2016-2022 / M400) In this new mini guide dedicated to your Chevrolet Spark M400 (2016-2022), you will discover where all the various fuses are located, allowing you to…
Replacement of the spark plugs of the Chevrolet Spark 1.2 16V.
Chevrolet Spark (2009-2016 / M300, MK 1) This short guide will illustrate the main instructions useful for disassembling and replacing the spark plugs of the Chevrolet Spark 1.2 16V engine. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos