Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on Daewoo Matiz

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Rear bumper

Removing the rear bumper on the Matiz is quite simple, so even for a minor touch-up, it is advisable to remove it rather than masking the entire car. Start by opening the boot to access the screws located just beneath the seal. Next, use a 7 mm spanner on the bolts at the corner of the bumper that connect it to the wing. There are also nuts inside the boot, and finally, the clips along the lower edge of the bumper. At this point, detach the side panels from the guides and complete the removal.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on Your Daewoo Matiz
How to Replace the Timing Belt on Your Daewoo Matiz
Chevrolet Matiz (1998-2010 / MK 1) This video will teach you how to replace the old timing belt on your Daewoo Matiz with a new one. To facilitate the removal and replacement of the be…
Where are the Fuses Located in the Daewoo Matiz?
Where are the Fuses Located in the Daewoo Matiz?
Chevrolet Matiz (1998-2010 / MK 1) In this video, see the location of the fuse boxes and their respective diagrams in the Daewoo Matiz, useful if you need to check the fuse of a malfun…
How to Remove the Instrument Cluster from a Daewoo Matiz?
How to Remove the Instrument Cluster from a Daewoo Matiz?
Chevrolet Matiz (1998-2010 / MK 1) To remove the instrument cluster from a Daewoo Matiz, use a tool to pry off the plastic cover that surrounds the central console and the instrument c…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos