Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Chevrolet Orlando?

Model: Chevrolet Orlando MK 1 - Years 2011-2016
Part: Car door

To remove the door panel of a Chevrolet Orlando, you need to take off the plastic part located under the window switch and the one inside the handle, as shown in the video. Next, unscrew the bolts that were covered by the plastic parts just removed: at this point, the panel will only be held in place by clips. These work by fitting together, so by applying slight pressure and pulling towards yourself, the panel should come away. For the final part, gently push the panel upwards to slide it off.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box on the 2014 Chevrolet Orlando?
Where is the Fuse Box on the 2014 Chevrolet Orlando?
Chevrolet Orlando (2011-2016 / MK 1) To easily locate the fuse box in your 2014 Chevrolet Orlando in just a few seconds, follow the steps outlined in this guide. First, park your Chevrol…
How to Remove the Steering Wheel Airbag on a Chevrolet Orlando
How to Remove the Steering Wheel Airbag on a Chevrolet Orlando
Chevrolet Orlando (2011-2016 / MK 1) Before starting, disconnect the battery of your Chevrolet Orlando to work safely. Sit in the driver's seat and turn the steering wheel. Next, unscrew…
Where is the fuse box located in the cabin of the Chevrolet Orlando?
Where is the fuse box located in the cabin of the Chevrolet Orlando?
Chevrolet Orlando (2011-2016 / MK 1) To safely locate the fuse box located inside the cabin of your Chevrolet Orlando, simply read carefully the steps described below and follow them ste…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos