Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Chevrolet Equinox

Model: Chevrolet Equinox MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter on a Chevrolet Equinox, first open the glove compartment (passenger side). Once the drawer is open, press inward on the sides until it releases from the top and opens further.

Now, looking into the compartment, you will find a latch attached to the drawer on your right. Gently detach it from its end and completely remove the drawer.

You will now see the filter box and the associated fan. The filter is protected by its support marked with the label FILTER ACCESS DOOR. At this point, remove the 2 screws holding the support and pull out the filter. Insert the new filter into the compartment in the same position as the old one, close the support with the 2 screws, and reattach the glove compartment.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Chevrolet Equinox?
How to Replace the Cabin Filter in a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the cabin filter in a Chevrolet Equinox, open the glove compartment located on the passenger side to disengage its internal mounting pins.…
How to Replace the Cabin Filter in a Chevrolet Equinox?
How to Replace the Cabin Filter in a Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) In this video, you can see how to replace the cabin filter in a Chevrolet Equinox, a very simple and quick operation. The filter is located behind th…
Replacing the Cabin Air Filter on the Chevrolet Equinox
Replacing the Cabin Air Filter on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This guide shows you how to remove and replace the cabin air filter on the Chevrolet Equinox. First, get inside the vehicle on the passenger side and…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos