Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : Disassembly of the Chevrolet Equinox air conditioning controls

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 1 - Years 2005-2009
Part: Air conditioning controls
Operation: Disassembly of the Chevrolet Equinox air conditioning controls

In today's video tutorial we will see how to remove and replace the Chevrolet Equinox air conditioning controls, in simple and quick steps. First of all, let's get on board the car and start by disassembling and removing the plastic cover of the central instrumentation, using a very thin plastic lever; after which we disconnect the electrical connector of the climate control controls that we find on the back, as shown in the video. At this point we release our controls to permanently remove them from the instrumentation; let's replace them with new ones and reassemble everything!


Posted on 14 April 2024 by ScegliAuto



How to know the fuse diagram of a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this video tutorial, we are shown the fuse diagrams related to a Chevrolet Equinox car. In relation to the box located inside the engine compartme
Replacing the cabin air filter on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, let's see how to disassemble and replace the Chevrolet Equinox cabin air filter. First of all, we get on board the car, on the passeng
Chevrolet Equinox Air Filter Replacement
Chevrolet Equinox (2005-2009 / MK 1) In this video tutorial we will see how to disassemble and replace the Chevrolet Equinox engine air filter, following the instructions below. First, w

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos