Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Equinox
  6. : How to open the remote control and replace the battery of the Chevrolet Equinox

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 1 - Years 2005-2009
Part: Key
Operation: How to open the remote control and replace the battery of the Chevrolet Equinox

Following these simple steps, we will see how to open the key remote and replace the battery of the Chevrolet Equinox. First, take the remote in hand and start to pry on the sides to open it in two parts, accessing the electronic board and the battery; then remove and replace the battery with the new one, of the correct type (in this case a CR 2032 3V), as shown in the video. Now insert the battery in the correct direction and reassemble the remote board, finally fixing the two remote shells and checking the functioning of the controls.


Posted on 30 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos