Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery for the Chevrolet Equinox Mk3

Model: Chevrolet Equinox MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

This guide shows how to replace the remote battery for the Chevrolet Equinox Mk3. First, remove the physical key from the housing by pressing the release button on the side of the remote. Using a small flathead screwdriver or the tip of the key, separate the two halves of the remote to access the battery compartment; slide out the circuit board and remove the battery.

Replace it with a CR2032 button battery. Reassemble everything and check the remote's proper operation.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a Chevrolet Equinox 3
How to Replace the Remote Battery in a Chevrolet Equinox 3
Chevrolet Equinox (2018-2025 / MK 3) To complete the replacement of the battery located inside the remote for your third-generation Chevrolet Equinox, follow the procedure described belo…
How to Open the Remote and Replace the Battery for the Chevrolet Equinox
How to Open the Remote and Replace the Battery for the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) Follow these simple steps to open the key remote and replace the battery for the Chevrolet Equinox. First, take your remote and pry it open at the si…
How to Replace the Battery in the Chevrolet Equinox Remote?
How to Replace the Battery in the Chevrolet Equinox Remote?
Chevrolet Equinox (2010-2017 / MK 2) In this tutorial, you will see how to replace the battery in the Chevrolet Equinox remote, a very simple and quick operation. To do this, get a small…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos