Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the key fob remote for the Chevrolet Equinox

Model: Chevrolet Equinox MK 1 - Years: 2005, 2006, 2007, 2008, 2009
Part: Key

See other generations:
Video tutorial

These brief instructions will guide us through the steps on how to disassemble and replace the battery of the key fob for the Chevrolet Equinox. First, take the key fob in hand and start prying on the side slot to open the key fob in two parts, thus accessing the electronic board and the battery; pry the battery out with something thin to remove it, as shown in the video.

At this point, insert the new battery in the correct direction, of the right type (in this case a CR 2032 3V); reassemble the key fob and test its functionality.


Posted on 2 July 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery for the Chevrolet Equinox Mk3
How to Replace the Remote Battery for the Chevrolet Equinox Mk3
Chevrolet Equinox (2018-2025 / MK 3) This guide shows how to replace the remote battery for the Chevrolet Equinox Mk3. First, remove the physical key from the housing by pressing the rel…
How to Replace the Remote Battery in a Chevrolet Equinox 3
How to Replace the Remote Battery in a Chevrolet Equinox 3
Chevrolet Equinox (2018-2025 / MK 3) To complete the replacement of the battery located inside the remote for your third-generation Chevrolet Equinox, follow the procedure described belo…
Replacing the Key Fob Battery for the Chevrolet Equinox
Replacing the Key Fob Battery for the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) Today, let's go through the process of disassembling and replacing the battery in the key fob for the Chevrolet Equinox. First, take your key fob and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos