Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery for the Chevrolet Equinox

Model: Chevrolet Equinox MK 1 - Years: 2005, 2006, 2007, 2008, 2009
Part: Key

See other generations:
Video tutorial

Today, let's go through the process of disassembling and replacing the battery in the key fob for the Chevrolet Equinox. First, take your key fob and use something thin and sharp to pry open the side slot.

Then, split the fob into two halves, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type (in this case, a CR2032 3V). Insert it in the correct orientation and reassemble the fob, checking that all buttons are functioning properly.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery for the Chevrolet Equinox
How to Replace the Key Fob Battery for the Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) These simple steps will show you how to disassemble and replace the battery in the key fob for the Chevrolet Equinox. First, take your key fob and re…
How to replace the battery of the key fob remote for the Chevrolet Equinox
How to replace the battery of the key fob remote for the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) These brief instructions will guide us through the steps on how to disassemble and replace the battery of the key fob for the Chevrolet Equinox. Firs…
How to Replace the Remote Battery for the Chevrolet Equinox Mk3
How to Replace the Remote Battery for the Chevrolet Equinox Mk3
Chevrolet Equinox (2018-2025 / MK 3) This guide shows how to replace the remote battery for the Chevrolet Equinox Mk3. First, remove the physical key from the housing by pressing the rel…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos