Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on the Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Air filter

See other generations:
Video tutorial

To replace the air filter in your vehicle, do the following: open the hood and locate the cover under which the filter is located, on the right side of the engine. Use a screwdriver to remove the screws securing the cover on the sides of the box. Once the cover is free from the screws, disconnect the mass airflow sensor connector and loosen the clamp screw.

Lift it up. Inside, you will find the air filter that can be removed. Take the new filter and place it in the housing.

Finally, reposition the cover and reattach all the screws.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter in a Chevrolet Traverse
How to Replace the Air Filter in a Chevrolet Traverse
Chevrolet Traverse (2018-2025 / MK 2) In today's video, you will see a very simple maintenance operation that can be easily performed in your garage. You will learn how to replace the air…
How to Replace the Cabin Air Filter in the Chevrolet Traverse
How to Replace the Cabin Air Filter in the Chevrolet Traverse
Chevrolet Traverse (2018-2025 / MK 2) The procedure to replace the cabin air filter is very similar in many vehicles. Below, we will discover how to perform this operation in your Chevrol…
How to Replace the Air Filter in a Chevrolet Traverse?
How to Replace the Air Filter in a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) In this tutorial, you will see how to replace the air filter in a Chevrolet Traverse, a very simple and quick operation. First, open the hood, then d…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos