Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Central Locking Module on the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Door lock

See other generations:
Video tutorial

In today's tutorial, you will learn how to remove and replace the central locking module on the Chevrolet Cruze by following these simple steps. First, get into the vehicle and locate the central locking module; it is fixed between the headlining and the windscreen, behind the external rear-view mirror, as shown in the video.

At this point, use a plastic lever to remove the entire module, disconnecting the electrical wiring; replace the central locking module with the new one, following the video until the end!


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Where are the fuses and relay for the fuel pump located in the Chevrolet Cruze?
Where are the fuses and relay for the fuel pump located in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In case of a malfunction with the fuel pump in your Chevrolet Cruze, first check the status of the relevant fuses and relay. As shown in this video, …
Where is the Fuse Box of the 2015 Chevrolet Cruze?
Where is the Fuse Box of the 2015 Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) If you do not know where the fuses are located in your 2015 Chevrolet Cruze, do not worry as this guide provides a description of all the necessary s…
What DIY Jobs Can Be Done on a Chevrolet Cruze?
What DIY Jobs Can Be Done on a Chevrolet Cruze?
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) A straightforward DIY job that can be done on a Chevrolet Cruze or any other car is replacing the key/remote battery. Let's get started: remove the e…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos