Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses and relay for the fuel pump located in the Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel pump

See other generations:
Video tutorial

In case of a malfunction with the fuel pump in your Chevrolet Cruze, first check the status of the relevant fuses and relay. As shown in this video, the fuses are located in the box within the engine compartment, under the black cover next to the battery.

They are labelled F18 and F28. The relay is number 8, but it may not be present as, in some models, it is replaced by a control module. This module is located in the boot, right on the right-hand wheel arch.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump Relay on a Chevrolet Cruze
How to Replace the Fuel Pump Relay on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this video tutorial, follow the instructions to remove and replace the fuel pump relay on a Chevrolet Cruze. First, open the bonnet and start by r…
Where are the fuses located in the Chevrolet Cruze?
Where are the fuses located in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) It will be possible to locate the fuses of the Chevrolet Cruze inside the designated fuse boxes installed in the vehicle: in this type of vehicle, th…
Guide to replacing the fuel pump of the Chevrolet Cruze
Guide to replacing the fuel pump of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Below we will see the main steps that will allow us to disassemble and replace the fuel pump of the Chevrolet Cruze. First, we open the rear doors of…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos