Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump Relay on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

In this video tutorial, follow the instructions to remove and replace the fuel pump relay on a Chevrolet Cruze. First, open the bonnet and start by removing the cover of the fuse box by unclipping the two side tabs; then locate the fuel pump relay, which is found in the central part (you can use the owner's manual to confirm the replaced component).

At this point, remove the old relay and replace it with the correct new one; then check its operation!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

Where are the fuses and relay for the fuel pump located in the Chevrolet Cruze?
Where are the fuses and relay for the fuel pump located in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In case of a malfunction with the fuel pump in your Chevrolet Cruze, first check the status of the relevant fuses and relay. As shown in this video, …
Replacing the Fuel Pump on a Chevrolet Cruze
Replacing the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The main steps today will show you how to remove and replace the fuel pump on a Chevrolet Cruze. First, lift the vehicle and begin removing the fuel …
How to Dismantle the Fuel Pump on a Chevrolet Cruze
How to Dismantle the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today's instructions will show you how to dismantle and replace the fuel pump on a Chevrolet Cruze. To access the fuel pump, it will be necessary to …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos