Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Exterior Rearview Mirror on the Chevrolet Colorado

Model: Chevrolet Colorado MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Side mirror

See other generations:
Video tutorial

This guide briefly explains how to remove and replace the exterior rearview mirror on the Chevrolet Colorado in simple and quick steps. First, open the front door and start by removing the triangular plastic cover; then disconnect the electrical connector and remove the mounting screws for the mirror to slide it out and take it off the exterior, as shown in the video.

At this point, replace the entire mirror with the new one, securing it properly; connect the electrical cable and finally adjust the glass!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Localization and diagram of the fuse boxes of the Chevrolet Colorado III
Localization and diagram of the fuse boxes of the Chevrolet Colorado III
Chevrolet Colorado (2023-2026 / MK 3) In this video, we see the arrangement of the boxes and the fuse diagram of the Chevrolet Colorado III: as for the interior, we will find the fuse box…
How to Replace the Battery on a Chevrolet Colorado
How to Replace the Battery on a Chevrolet Colorado
Chevrolet Colorado (2015-2022 / MK 2) This guide shows how to remove and replace the battery on the Chevrolet Colorado, following the instructions below. First, open the hood of your car …
How to Replace the Key Fob Battery in a Chevrolet Colorado?
How to Replace the Key Fob Battery in a Chevrolet Colorado?
Chevrolet Colorado (2004-2012 / MK 1) In this tutorial, you will see how to replace the key fob battery in a Chevrolet Colorado, a very simple task. You will only need a small flathead sc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos