Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Orlando
    4. : Service light reset on 2012 Chevrolet Orlando

Chevrolet Orlando - Video tutorial

Model: Chevrolet Orlando MK 1 - Years 2011-2016
Part: Checks and maintenance
Operation: Service light reset on 2012 Chevrolet Orlando

In this video tutorial we are going to see how to reset the maintenance warning light on a Chevrolet Orlando produced from 2011 to 2016. To start we turn on the instrument panel of the car but without starting it, now we go to press the "menu" button located on the left lever of the steering wheel, now we use the arrows next to it to select the item relating to the remaining life of the oil, after which we hold down the end lever button and the brake pedal at the same time for a few seconds, then we can go and release everything and turn off the ignition. Now we turn on the instrument panel again to verify the correct reset of the service warning light.


Posted on 12 July 2022 by ScegliAuto

    Frequently Asked Questions

    • Orlando 2011-2016 - What are the warning lights of the Chevrolet Orlando? Read Answer
    • Orlando 2011-2016 - What does code 82 indicate in the Chevrolet Orlando? Read Answer
    • Orlando 2011-2016 - What does code 84 mean on Chevrolet Orlando? Read Answer
    • Orlando 2011-2016 - What does the code 54 mean in the Chevrolet Orlando? Read Answer
    • Orlando 2011-2016 - What does code 84 mean in the Chevrolet Orlando diesel? Read Answer
    • Orlando 2011-2016 - What does code 89 mean on the Chevrolet Orlando? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos