Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the ECU on a Chevrolet Spin?

Model: Chevrolet Chevrolet Various
Part: Warning light – error code

Video tutorial

In this tutorial, you will see how to reset the ECU on a Chevrolet Spin, a simple operation to perform if it shows malfunctions in engine management. First, ensure the key is not inserted, then open the bonnet, remove the cover of the fuse box, and locate fuse number 18, rated at 10A. Remove it using the appropriate pliers, turn the ignition on and off at least three times consecutively, and then reinsert the fuse into its housing, always with the vehicle off. Start the engine and check that the procedure was successful.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the Chevrolet Spin?
Where is the fuse box located in the Chevrolet Spin?
Chevrolet Chevrolet Various The Chevrolet Spin, produced from 2013 to 2018, contains two fuse boxes. The first fuse box is located inside the cabin, specifically behind the glov…
How to Reset the Radio on a Chevrolet
How to Reset the Radio on a Chevrolet
Chevrolet Chevrolet Various This video shows the procedure to reset the Chevrolet MyLink radio. The process is very simple and quick; to perform the reset, press the button loca…
Diagnosis and solution of code 89 on the Chevrolet Tracker
Diagnosis and solution of code 89 on the Chevrolet Tracker
Chevrolet Chevrolet Various In this video, we can see how to diagnose and resolve error 89 on the Chevrolet Tracker, but in general on any vehicle with an Ecotec engine. This re…

Other guides you may be interested in

    Frequently Asked Questions

    • Chevrolet Vari - What Does Chevrolet Error Code # 89 Mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos