Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Chevrolet Silverado Pickup

Model: Chevrolet Silverado MK 3 - Years 2014-2018
Part: Battery

In this tutorial, you will see how to replace the battery in a Chevrolet Silverado pickup. Start by opening the hood. Next, move to the passenger side and remove the upper bracket using a 13mm socket wrench. Then, with a 10mm wrench, loosen the nuts on both terminals and disconnect them, starting with the negative terminal. Finally, remove the lower mounting bolt and take out the battery. After cleaning the bottom of the tray if necessary, install the replacement by following the reverse procedure, making sure to connect the positive terminal first.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?
How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?
Chevrolet Silverado (2007-2014 / MK 2) In this tutorial, you will see how to replace the fuel filter in a Chevrolet Silverado pickup, a very simple and quick operation. First, go to the fr…
What is the fuse diagram for the Chevrolet Silverado pickup?
What is the fuse diagram for the Chevrolet Silverado pickup?
Chevrolet Silverado (2007-2014 / MK 2) If any devices in your Chevrolet Silverado pickup have suddenly stopped working, first check the status of the corresponding fuses, which are indicat…
How to Replace the Heater Core in a Chevrolet Silverado Pickup?
How to Replace the Heater Core in a Chevrolet Silverado Pickup?
Chevrolet Silverado (1998-2007 / MK 1) In this tutorial, you will learn how to replace the heater core in a Chevrolet Silverado pickup. This operation is very simple. First, ensure the eng…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos