Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Chevrolet Silverado

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Battery

Do you want to proceed with the DIY battery replacement on this vehicle? In the description below, we have gathered and indicated all the information and the procedure to follow for a safe replacement. With the hood open, the battery is located on the right side under the windshield, and to access it, you need to remove the upper support plate. Then, disconnect the negative terminal first and then the positive terminal, remove the securing block at the base, and pull the battery out of the compartment. Next, take the new battery and place it in, reattach the securing plate at the base, and finally connect the positive terminal first and then the negative terminal.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on the Chevrolet Silverado
How to Replace the Battery on the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) Let's look at this guide for the instructions to remove and replace the battery on the Chevrolet Silverado in simple and quick steps. First, open the…
How to Replace the Key Fob Battery for the Chevrolet Silverado?
How to Replace the Key Fob Battery for the Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) Replacing the key fob battery for the Chevrolet Silverado is very simple. Follow these steps in this tutorial. For this operation, you will need a sm…
How to replace the key battery for the new Chevrolet Silverado
How to replace the key battery for the new Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) If you own the new Chevrolet Silverado and want to learn how to replace the key battery safely and independently, just read the following mini guide …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos