Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Bolt Ev
    4. : How to protect the Chevrolet Bolt EV charging manifold from rain

Chevrolet Bolt Ev - Video tutorial

Model: Chevrolet Bolt Ev MK 1 - Years 2017-2024
Operation: How to protect the Chevrolet Bolt EV charging manifold from rain

In this video we will show you how to protect the Chevrolet Bolt EV charging manifold from the rain. Take a transparent plastic box of the similar format to the one you see in the video. Cut the bottom of the box with a cutter or scissors. Line the edge of the box that has been cut with some fairly wide electrical tape to prevent cuts. Take a plastic bag similar to those used to freeze food. Put the box in the plastic bag and match the two edges as seen in the video. Now tape the two edges together so that they stick together. Finally, cut the bottom of the bag with scissors to create an opening for the refill collector to pass through.


Posted on 4 December 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos