|
Do it yourself
| |||
| ||||
How to Change the Battery of the Chevrolet Captiva Remote
Model: Chevrolet Captiva
MK 1
- Years 2006-2018
Follow this procedure to disassemble and replace the battery of the Chevrolet Captiva key remote. First, take the remote in hand and use a thin object to pry open the side slot, separating the two halves of the casing. Next, remove the old battery from the circuit board, as shown in the video. Now, install the new battery of the correct type (in this case, a CR 1620 3V); insert it in the correct orientation and reassemble the remote, following the video tutorial to the end!
Updated on 28 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Chevrolet Captiva
(2006-2018 /
MK 1)
Today we will explain how to replace the battery of a car remote control. To replace the battery of the Chevrolet Captiva remote control, we need to …
Chevrolet Captiva
(2006-2018 /
MK 1)
Before you begin, extract the emergency key from the electric key of your Chevrolet Captiva by simply pressing the top unlock button. Using a large f…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.299
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |