Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years 2009-2017
Part: Headlight bulb

If you notice that a headlight bulb on the vehicle is burned out, you need to replace it by following the instructions below: On this vehicle, replacing a bulb is not a very simple task because to access the bulb, you must remove the plastic inner fender by unclipping the fasteners. Once you reach behind the fender, you can access the bulb, disconnect the power connector, and remove the bulb itself. Then, take the new bulb and place it in the socket, secure it, and reconnect the connector. Finally, reattach the fender clips.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in a Chevrolet Traverse
How to Replace the Air Filter in a Chevrolet Traverse
Chevrolet Traverse (2018-2025 / MK 2) In today's video, you will see a very simple maintenance operation that can be easily performed in your garage. You will learn how to replace the air…
How do you reset the tire pressure light on the Chevrolet Traverse?
How do you reset the tire pressure light on the Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To reset the tire pressure light on the Chevrolet Traverse, you need to inflate the tires to the recommended pressure value: this value will be indic…
How to Replace the Key Battery of the Chevrolet Traverse 2
How to Replace the Key Battery of the Chevrolet Traverse 2
Chevrolet Traverse (2018-2025 / MK 2) This guide describes the entire procedure you need to follow to replace the small battery located inside the key of your second-generation Chevrolet …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos