Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

See other generations:
Video tutorial

These simple steps will allow you to remove and replace the front headlight on a Chevrolet Traverse. First, open the hood of the vehicle and start removing all the plastic clips located at the top, thus removing the cover; then, unscrew all the mounting screws located above the grille and below the bumper, followed by the additional screws found on both sides of the front wheel wells.

At this point, gently detach the bumper from the sides, unscrewing all the screws of the headlight assembly; disconnect the electrical connector of the bulbs to remove and replace the headlight with the new one!


Posted on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Chevrolet Traverse
How to Replace the Front Wipers on the Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) Today, we will provide instructions on how to remove and replace the front wipers on the Chevrolet Traverse in simple and quick steps. First, move to…
How to Replace the Front Windshield Wiper on the Chevrolet Traverse
How to Replace the Front Windshield Wiper on the Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) If the front windshield wiper on your Chevrolet Traverse Mk1 shows significant signs of wear, it's time to replace it. In this mini guide, you will l…
How to Replace the Door Panel of the Chevrolet Traverse?
How to Replace the Door Panel of the Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the door panel of the Chevrolet Traverse, detach the cover located at the internal handle to loosen the underlying screw. Next, loosen the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos