Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel of the Chevrolet Traverse?

Model: Chevrolet Traverse MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

To replace the door panel of the Chevrolet Traverse, detach the cover located at the internal handle to loosen the underlying screw. Next, loosen the screw near the window switch so you can start removing the panel from its bottom.

To completely remove it, you will also need to disconnect the connectors inside; after removing the old panel, you can insert the new one, securing it with the appropriate screws.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Remove the Driver's Door Switch Panel on a Chevrolet Traverse?
How to Remove the Driver's Door Switch Panel on a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) In this tutorial, you will learn how to remove the driver's door switch panel on a Chevrolet Traverse, a very simple and quick operation. First, ensu…
How to Replace the Exterior Door Handle on a Chevrolet Traverse?
How to Replace the Exterior Door Handle on a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the exterior door handle on a Chevrolet Traverse, open the car door to detach the circular rubber cover on the side of the door. Under thi…
How do you reset the tire pressure light on the Chevrolet Traverse?
How do you reset the tire pressure light on the Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To reset the tire pressure light on the Chevrolet Traverse, you need to inflate the tires to the recommended pressure value: this value will be indic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos