Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Headlight on a Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years 2009-2017
Part: Headlight bulb

If you need to replace a headlight bulb on this vehicle, follow the instructions provided in this description and refer to the images in the tutorial video. First, locate the headlight with the burnt-out bulb. Then, remove the retaining clips from the plastic inner fender, reach inside, and remove the rear protective cover of the headlight. Disconnect the bulb connector to extract the bulb. Take the new bulb, being careful not to touch the glass with your fingers, and place it back in its housing before reconnecting the connector. Finally, replace the rear protective cover of the headlight and reattach the fender clips.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on a Chevrolet Traverse
How to Replace the Front Headlight on a Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) These simple steps will allow you to remove and replace the front headlight on a Chevrolet Traverse. First, open the hood of the vehicle and start re…
How to Replace the Key Battery of the Chevrolet Traverse 2
How to Replace the Key Battery of the Chevrolet Traverse 2
Chevrolet Traverse (2018-2025 / MK 2) This guide describes the entire procedure you need to follow to replace the small battery located inside the key of your second-generation Chevrolet …
How to Replace the Key Battery in Your Chevrolet Traverse
How to Replace the Key Battery in Your Chevrolet Traverse
Chevrolet Traverse (2018-2025 / MK 2) To replace the battery in your Chevrolet Traverse key, you only need a small flathead screwdriver. Follow these steps. First, press the button locate…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos