Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight on the Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

If you need to replace the rear headlight on this vehicle, you can find the information and instructions in this description and also refer to the video. First, remove the two plastic covers over the screws and use a socket wrench to unscrew them.

This will allow you to pull out the light assembly by gently pulling it towards you while disconnecting the connectors behind it. Then, take the new headlight, position it, reconnect the electrical connectors, and reattach the two screws and their covers.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorber on a Chevrolet Traverse?
How to Replace the Rear Shock Absorber on a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the rear shock absorber on a Chevrolet Traverse, lift the vehicle so that the corresponding wheel is off the ground. Once lifted, loosen t…
How to Replace the Rear Shock Absorber on a Chevrolet Traverse?
How to Replace the Rear Shock Absorber on a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the rear shock absorber on a Chevrolet Traverse, lift the vehicle so that the corresponding wheel is not in contact with the ground. Once …
How to Replace the Starter Motor in the Chevrolet Traverse
How to Replace the Starter Motor in the Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) In today's video tutorial, you will see how to remove and replace the starter motor in the Chevrolet Traverse by following these simple steps. First,…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos