Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Chevrolet Cobalt

Model: Chevrolet Chevrolet Various
Part: Antenna

Video tutorial

In this tutorial, see how to replace the antenna on a Chevrolet Cobalt by following these simple steps: on the passenger side, remove the front cover. You will see a bracket holding the antenna; use a 10 mm socket spanner to remove the bracket.

Once the bracket is removed, push the rubber of the antenna upwards to extract it. Remove the rubber, then use two pliers to unscrew the antenna shaft. After unscrewing the antenna shaft, clean the wires using a wire brush (if necessary, replace the old antenna with a new one). Next, screw the shaft back in using the two pliers.

The next step is to reinstall the antenna by reversing the process.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

What is the fuse layout of the Chevrolet Cobalt?
What is the fuse layout of the Chevrolet Cobalt?
Chevrolet Chevrolet Various In this video we can see where the fuse boxes of the Chevrolet Cobalt are located and what their respective diagrams are, to consult in case we need …
How to replace the headlight bulb of the Chevrolet Cobalt.
How to replace the headlight bulb of the Chevrolet Cobalt.
Chevrolet Chevrolet Various Today we will explain how to replace the headlight bulb of the 2005 Chevrolet Cobalt on your own. First, lift the clip pin to remove the front bumper…
How to Replace the Radio Aerial on a Chevrolet C1500
How to Replace the Radio Aerial on a Chevrolet C1500
Chevrolet Chevrolet Various If you need to replace the radio aerial on your Chevrolet C1500, simply follow these instructions. The whole operation is much simpler than expected …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos