Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Chevrolet Cobalt.

Model: Chevrolet Chevrolet Various
Part: Headlight bulb

Today we will explain how to replace the headlight bulb of the 2005 Chevrolet Cobalt on your own. First, lift the clip pin to remove the front bumper cover using a trim removal tool or a flathead screwdriver. Then, remove the two bolts located on the headlight using a 10 mm socket wrench. Press on the bumper and pull the front headlight outward to remove it. Press on the tabs on the headlight connector to disconnect it. Remove the cover around the bulb to disconnect and replace it. Once the replacement is complete, insert the headlight back into the bumper and reconnect the connector. Tighten the two bolts and reattach the bumper cover. Follow the same steps to replace the left headlight bulb.

Posted on 31 December 2025 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout of the Chevrolet Cobalt?
What is the fuse layout of the Chevrolet Cobalt?
Chevrolet Chevrolet Various In this video we can see where the fuse boxes of the Chevrolet Cobalt are located and what their respective diagrams are, to consult in case we need …
How to Replace the Antenna on a Chevrolet Cobalt
How to Replace the Antenna on a Chevrolet Cobalt
Chevrolet Chevrolet Various In this tutorial, see how to replace the antenna on a Chevrolet Cobalt by following these simple steps: on the passenger side, remove the front cover…
What does error code 18 of the Chevrolet Prisma indicate?
What does error code 18 of the Chevrolet Prisma indicate?
Chevrolet Chevrolet Various On Chevrolet vehicles, especially Chevrolet Prisma, error code 18 may appear on the instrument panel. This error code, as reported in the instruction…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos