Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter on a Chevrolet Cruze, open the glove compartment on the passenger side to unclip the internal side pins. Once these pins are unclipped, you can completely remove the glove compartment and access the filter box located at the back, opening it by detaching the cover.

At this point, you can pull out the filter from its housing and replace it with a new part; after replacement, reassemble the glove compartment.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to Replace the Engine Air Filter on a 2014 Chevrolet Cruze
How to Replace the Engine Air Filter on a 2014 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If the engine of your 2014 Chevrolet Cruze frequently overheats due to a worn or dirty air filter and you want to replace it yourself, follow the ins…
Removing the Starter Motor on a Chevrolet Cruze
Removing the Starter Motor on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the starter motor on your Chevrolet Cruze not working anymore? Let's look at how to remove the starter motor on a Cruze. Open and lift the front b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos