Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Lights on a Chevrolet Suburban?

Model: Chevrolet Suburban Gmt900 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

As seen in this tutorial, replacing the tail lights on a Chevrolet Suburban is an extremely simple and quick task. Before proceeding, ensure the key is not in the ignition for safety.

Start by opening the trunk, then remove the two screws located on the inner edge of the light with a Phillips screwdriver. Once done, grasp the light assembly, pull it outward, and remove it from the body.

Finally, remove the three bulbs, insert them into the replacement light, and install it by reversing the procedure.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on the Chevrolet Suburban
How to Replace the Key Battery on the Chevrolet Suburban
Chevrolet Suburban (2021-2026 / Gmt1yc) In the following guide, you will find the procedure to replace the battery of your Chevrolet Suburban key yourself. First, you need to purchase a new…
How to Replace the Battery in a Chevrolet Suburban?
How to Replace the Battery in a Chevrolet Suburban?
Chevrolet Suburban (2007-2014 / Gmt900) To replace the battery in a Chevrolet Suburban, open the hood to access the components inside the engine compartment. The battery is located in the u…
How to Replace the Headlight Bulb on a Chevrolet Suburban?
How to Replace the Headlight Bulb on a Chevrolet Suburban?
Chevrolet Suburban (2007-2014 / Gmt900) To replace the headlight bulb on a Chevrolet Suburban, open the hood to access the components in the upper part of the engine bay. You will need to d…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos