Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Bolt Ev
    4. : How to replace the cabin air filter on the Chevrolet Bolt Ev.

Chevrolet Bolt Ev - Video tutorial

Model: Chevrolet Bolt Ev MK 1 - Years 2017-2024
Part: Cabin air filter
Operation: How to replace the cabin air filter on the Chevrolet Bolt Ev.

If we intend to replace the cabin air filter on this car model, in the description below we will find all the useful indications and the necessary steps for the correct replacement. After sitting in the passenger seat, proceed to open the glove compartment and release the blocks located on the sides in order to completely fold down the compartment. Behind it, we will find the compartment that contains the filter and to access it we must remove the cover that we will find in front of us by pulling it towards ourselves. Then remove the filter and replace it with the new one, then close the cover again and reposition the glove compartment.


Posted on 23 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos