Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Chevrolet Bolt EV?

Model: Chevrolet Bolt Ev MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

Video tutorial

In this tutorial, you will see how to replace the cabin filter in the Chevrolet Bolt EV, a very simple and quick operation. First, sit in the passenger seat, then open the glove compartment and disconnect the damper on the right side.

Next, press both sides inward, unclip the drawer from the dashboard, and remove it completely. At this point, you can open the long rectangular cover and pull out the old filter.

Finally, install the new filter by following the reverse procedure and clean the inside of the housing well.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Chevrolet Bolt EV?
How to Replace the Cabin Air Filter on a Chevrolet Bolt EV?
Chevrolet Bolt Ev (2017-2024 / MK 1) In this video, you will find the information and steps necessary to replace the cabin air filter of the vehicle: first, access the cabin and sit in t…
How to Replace the Cabin Air Filter on the Chevrolet Bolt
Chevrolet Bolt Ev (2017-2024 / MK 1) In the description below, you can find instructions on how to replace the cabin air filter on this vehicle. The first step is to access the cabin fro…
How to Replace the Cabin Air Filter on the Chevrolet Bolt EV
How to Replace the Cabin Air Filter on the Chevrolet Bolt EV
Chevrolet Bolt Ev (2017-2024 / MK 1) If you intend to replace the cabin air filter on this vehicle model, the description below provides all the useful instructions and necessary steps f…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos