Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the "OnStar" Service on a Chevrolet Spark

Model: Chevrolet Spark M400 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

See other generations:
This video is currently unavailable

This video explains how to disable the "OnStar" system on the Chevrolet Spark: this system is a security feature that tracks your location to assist you in case of difficulty. However, not everyone likes being tracked everywhere, so let's see how to disable the system.

You will need a flathead screwdriver. Start the vehicle: a green LED will light up above the mirror.

Under the driver's seat, you will find a couple of different cables; push down the tab to remove one, then release and remove the other cable as well. Now restart the vehicle and see that the LED is red. For safety, also disconnect the other plug found under the driver's seat.

When you start the car now, the light should be completely off.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) In this tutorial, you will see the steps to remove and replace the ignition coil connected to the spark plugs, which allows the current to pass for t…
How do you replace the spark plugs on a Chevrolet Spark?
How do you replace the spark plugs on a Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) Replacing the spark plugs on your Chevrolet Spark is a simple job that you can do in a few steps. First of all, turn off the engine and let it cool d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos