Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a 2004 Chevrolet Impala

Model: Chevrolet Impala MK 8 - Years: 2000, 2001, 2002, 2003, 2004, 2005
Part: Service warning light

See other generations:
Video tutorial

To manually reset the oil light on your 2004 Chevrolet Impala, carefully follow the instructions in this guide. First, enter the cabin and turn on the radio.

Next, press and hold the "Tune" button for a few seconds to access the vehicle settings. At this point, scroll through the menu and find the "Oil life" option.

Then, press the number 1 button and finally, press and hold the "Tune" button again until the oil light reset is complete, and turn off the radio.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Chevrolet Impala
How to Reset the Oil Light on a Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) If the engine oil light on your Chevrolet Impala Mk2 stays on even after you have changed the oil and the filter, you must perform a manual reset. He…
How to Reset the Oil Service Light on a Chevrolet Impala?
Chevrolet Impala (2014-2020 / MK 10) Resetting the oil service light on a Chevrolet Impala, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensu…
How to Reset the Oil Life Indicator on Chevrolet Impala
How to Reset the Oil Life Indicator on Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) In this video tutorial, you can see how to reset the oil life indicator on a Chevrolet Impala. The first step is to perform maintenance on the vehicl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos