Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Chevrolet Spark?

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Service warning light

To reset the Service light on the Chevrolet Spark, turn on the instrument cluster by inserting the key into the ignition switch. Once this is powered on, navigate through the menu that appears on the instrument cluster using the button located at the top right of the display. This will allow you to move through the menu until the oil life indicator is displayed; once shown, press and hold the button at the bottom right of the cluster, then switch it off.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Chevrolet Spark
How to reset the service light on the Chevrolet Spark
Chevrolet Spark (2016-2022 / M400) Let's see the information on how to reset the service maintenance light for the regular oil change of the Chevrolet Spark. First, we get into the car…
How to reset the warning light on the 2017 Chevrolet Spark
How to reset the warning light on the 2017 Chevrolet Spark
Chevrolet Spark (2016-2022 / M400) The reset of the service light related to the maintenance on a 2017 Chevrolet Spark follows the same procedure used for a Holden vehicle of the same …
How do you reset the Service light on the Chevrolet Spark?
How do you reset the Service light on the Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) The Service indicator that appears on the instrument panel of the Chevrolet Spark can be reset by turning on the instrument panel, inserting the igni…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos