Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Motor in a Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Accessory kit

See other generations:
Video tutorial

First, release the bonnet using the lever, then lift it and disconnect the battery terminals to protect any electronic devices. Next, open the glove compartment door in front of the front passenger seat to detach and lower it completely.

Remove the screws indicated in the video and disconnect the connectors supplying power to the motor. After that, simply unscrew the bolts securing the motor, remove it, and replace it. Follow the steps in reverse for reassembly, and you're done!


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Chevrolet Spark 2
How to Replace the Cabin Air Filter in a Chevrolet Spark 2
Chevrolet Spark (2016-2022 / M400) If it is time to replace the cabin air filter in your Chevrolet Spark Mk2, follow the instructions in this guide to complete the operation without an…
What is the Fuse Diagram for the Chevrolet Spark?
What is the Fuse Diagram for the Chevrolet Spark?
Chevrolet Spark (2016-2022 / M400) If any of the various devices in your Chevrolet Spark has suddenly stopped working, first check the status of the respective fuses, the diagrams for …
Where is the Fuse Box on the Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) The Chevrolet Spark model produced from 2009 to 2016 contains two fuse boxes. The first fuse box is located inside the cabin, specifically behind the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos