Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Chevrolet Cruze?

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part:

In this tutorial we can see how to reset the tire pressure light in the Chevrolet Cruze, an extremely simple and quick operation, to be done only once the correct pressure of each tire has been restored. To do this, we will also need the scanner shown in the video, which can also be found online. First of all, turn on the instrument panel, then, using the buttons on the left lever, reach the screen related to the pressures, press the "SET/CLR" button and start the calibration. At this point, place the scanner in front of the left front valve, activate it and repeat this last step for the remaining tires, going clockwise.

Posted on 30 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2012 Chevrolet Cruze
How to reset the oil light on the 2012 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) If you own a 2012 Chevrolet Cruze and want to manually reset the engine oil light, all you have to do is follow the procedure described in the follow…
How to reset the TPMS light on the 2012 Chevrolet Cruze
How to reset the TPMS light on the 2012 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) The following video tutorial shows us the steps to reset the tire pressure light on a 2012 Chevrolet Cruze. The first step is to press the menu butto…
How to reset the tire pressure light in the Chevrolet Cruze?
How to reset the tire pressure light in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this tutorial we can see how to reset the tire pressure light in the Chevrolet Cruze, an extremely simple and quick operation, to be performed onl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos