Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Installing Lowered Suspension

Model: Chrysler 300c MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Suspension system

See other generations:
Video tutorial

The video shows how to replace the original springs of your vehicle with lowered springs, in this case by 30 mm. First, as shown, unscrew the fixing bolts of the front shock absorber mount and free the arm. Then unscrew the shock absorber and remove it; using the tool shown, compress the original spring and proceed to detach the shock absorber support from the strut and slide out the spring.

Insert the new spring and proceed with reassembly following the instructions in reverse.

The procedure for the rear shock absorber is similar. The vehicle in the video is a Chrysler 300C.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Shock Absorbers
Chrysler 300c (2004-2011 / MK 1) Lift the vehicle on a ramp. Unscrew the bolts and remove the wheel. Unscrew and extract the retaining pins of the arm from the suspension with a 16mm…
Guide to Installing Angel Eyes Headlights
Guide to Installing Angel Eyes Headlights
Chrysler 300c (2004-2011 / MK 1) The video guides you through the installation of angel eyes headlights on your vehicle. After removing the original headlamp unit from its location, …
How to Replace the Key Battery on the New Chrysler 300
How to Replace the Key Battery on the New Chrysler 300
Chrysler 300c (2011-2023 / LD, MK 2) If you own the brand new Chrysler 300 and want to learn how to correctly replace the button battery in the smart key, carefully read the following gu…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos