Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Installing Angel Eyes Headlights

Model: Chrysler 300c MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Accessory kit

See other generations:
Video tutorial

The video guides you through the installation of angel eyes headlights on your vehicle. After removing the original headlamp unit from its location, identify the connectors shown in the video to connect the new lights.

Using faston connectors, connect the dipped beam light by bypassing the original connector; the same modification should be made for the position lights as illustrated. The visual effect is striking, but the installation is not straightforward, so if you lack manual dexterity, it is advisable to consult your trusted auto electrician.

The car in the video is a Chrysler 300C, but the procedure is similar for other vehicles.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Installation of LED Fog Lights
Chrysler 300c (2004-2011 / MK 1) To remove the original fog lights, first detach the front bumper by releasing the clips at the wheel arches and other fastening screws. Proceed to re…
Front Bumper Removal Instructions
Chrysler 300c (2004-2011 / MK 1) First, remove the pressure clips securing the wheel arches and unscrew the fixing pins of the bumper located at the inner edge. Continue by removing …
EGR Valve Replacement Instructions
EGR Valve Replacement Instructions
Chrysler 300c (2004-2011 / MK 1) To remove the EGR valve, it is recommended to lift the vehicle on a ramp and access the engine compartment from underneath as the valve is located at…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos