Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Radio from a Chrysler 200?

Model: Chrysler 200 MK 1 - Years: 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

To remove the radio from a Chrysler 200, use a tool to pry off the trim that surrounds the device, which also includes the air vents. This will allow you to completely remove the trim by disconnecting the connector attached to the back of the air vents.

This way, the screws that secure the radio will be visible, allowing you to pull it out of its housing and replace it with a new part. After the replacement, you can reinstall the trim and the air vents.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Chrysler 200 (2011-2014 / MK 1) In today's video, we will see how to reset the Uconnect system in the Chrysler 200. This tutorial also applies to other models from the American manu…
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
Chrysler 200 (2015-2017 / MK 2) If you own a second-generation Chrysler 200 and are wondering where the fuse box containing all the various fuses is located, just read this guide an…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos