Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery in a Chrysler 200

Model: Chrysler 200 MK 2 - Years: 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

Replacing the battery in the key fob of a Chrysler 200 is straightforward. Before starting, ensure you have the correct battery model, which is a flat CR 2032 type.

Take the key fob and press the small lever on the short side of the casing; this will allow you to extract the key from the fob. Now, using a flathead screwdriver, pry open the sides of the casing (both short and long sides); once the fob is open, you will have access to the battery.

Simply remove the old battery and replace it with the new one.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery for the Chrysler 200
How to Replace the Key Fob Battery for the Chrysler 200
Chrysler 200 (2015-2017 / MK 2) In today's video, you will see how to replace the dead battery in the key fob for the Chrysler 200. This tutorial also applies to other contemporary …
How to Remove the Climate Control Buttons from the Chrysler 200?
How to Remove the Climate Control Buttons from the Chrysler 200?
Chrysler 200 (2015-2017 / MK 2) To remove the climate control buttons from the Chrysler 200, pry with a tool like a screwdriver at the bottom of the panel to release its internal cl…
How to Replace the Key Battery in a Chrysler 200
How to Replace the Key Battery in a Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If the smart key for your Chrysler 200 suddenly stops working, don't rush to buy a new one. The issue may simply be due to a dead battery. Let's see …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos