Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear tailgate panel of the Citroen Berlingo 2

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Car door

Disassembling the rear tailgate panel of your second series Citroen Berlingo is very simple and to complete the operation, you just need to follow the steps described in the following procedure. First of all, open the tailgate and remove all the various rubber hooks. Once you have done this, remove the upper plastic cover and unscrew all the screws with a suitable screwdriver. Once all the screws of the panel are unscrewed, use a flat screwdriver to remove it, being careful not to damage it. Finally, remove the entire panel and the procedure is successfully completed.

Posted on 3 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Rear Tailgate of the Citroen Berlingo
How to Open the Rear Tailgate of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Let's briefly see how to open the rear hatch or tailgate of the Citroen Berlingo, as well as the Peugeot Partner Tepee. The tailgate of this vehicle …
How to Remove the Handle of the Citroen Berlingo
How to Remove the Handle of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) How do you remove the rear handle of the Citroen Berlingo? Start by opening the tailgate. Remove the cover panel at the rear of the tailgate to acces…
Removing the Boot Lock on a Citroen Berlingo
Removing the Boot Lock on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today's instructions will show you the steps to remove and replace the boot lock on the Citroen Berlingo. First, open the tailgate and begin to remov…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos