Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2018 Citroen Berlingo

Model: Citroen Berlingo MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

The service light on the instrument cluster of your 2018 Citroen Berlingo is a simple reminder that you need to carry out a vehicle service. If it continues to illuminate after performing this operation, you must proceed with a manual reset of the light.

First, enter the vehicle and reach the driver's seat, then ensure the ignition is off and press the button with a spanner icon located below the display. At the same time, turn on the ignition and wait ten seconds for the service light reset to complete.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Citroën Berlingo
How to reset the service light on the Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) The service light activates on the dashboard when it is necessary to go to the workshop to perform the operations that make up the car service. At th…
How to Reset the Service Light on a Citroen Berlingo
How to Reset the Service Light on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) When the service light comes on in a Citroen Berlingo, first perform the vehicle service and then reset the light. The reset procedure is quick and e…
How to Reset the Service Light on a Citroen Berlingo
How to Reset the Service Light on a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) The procedure to correctly reset the service light on a Citroen Berlingo is quite simple and can be done by anyone in their own garage. First, locate…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos