Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Timing belt

For this simple operation, make space from behind the right wheel arch for easier access. Now, unscrew the bolts securing the cover over the timing belt. Next, remove the bolt that secures the tensioner pulley in its working position. By relieving the tension on the belt, you can comfortably extract it without much effort. Remove any parts that obstruct the work, such as the rev sensor. Once removed, you can install the new belt.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
Citroen C3 (2002-2009 / FC, FN) This guide outlines the steps to remove and replace the timing belt on a Citroen C3 1.6 HDI. Remember, the timing belt should be replaced every 112,0…
Guide to Replacing the Timing Belt on the Citroen C3 1.2 Puretech
Guide to Replacing the Timing Belt on the Citroen C3 1.2 Puretech
Citroen C3 (2016-2023 / SY, SX) Today we will look at the useful instructions for removing and replacing the timing belt on the Citroen C3 1.2 Puretech; the timing belt replacement …
How to Replace the Timing Belt on the Citroen C3
How to Replace the Timing Belt on the Citroen C3
Citroen C3 (2002-2009 / FC, FN) In today's video, you will learn how to replace the timing belt on the Citroen C3. First, position the car on a lift to raise the vehicle and work co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos