Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the BSI control unit of Citroën cars?

Model: Citroen Citroen Various
Part: Control unit

In order to reset the BSI control unit on Citroën vehicles, it is necessary to connect a diagnostic tool to the OBD port of the vehicle: this port is located on the lower left side of the dashboard, next to the steering column. Once the scanner is connected, you can select the specific model of the car and its corresponding version; this will allow you to access the errors stored in the BSI control unit, which must all be completely reset. After the reset, you can disconnect the scanner and verify that the reset has been successful.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Citroen Citroen Various In order to reset the BSI control unit installed on Citroën vehicles, you need to connect a diagnostic tool to the OBD port of the vehicle or directl…
Citroen Citroen Various In order to reset the BSI control unit of Citroën cars, it is necessary to remove the device from its housing, which is usually located inside the en…
Citroen Citroen Various To reset the BSI unit on Citroën cars, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port is generally located on t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos