Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Citroen Berlingo?

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Service warning light

To reset the "Service" light on a Citroen Berlingo, start by sitting in the driver's seat. Then, proceed by turning on the car's ignition by simply turning the key in the ignition switch. Once turned on, locate the reset button under the instrument panel. Press and hold this button for a few seconds until the "Service" light turns off. Release the button. The "Service" light should now be reset. Make sure to be careful during the procedure and to carefully follow the owner's manual instructions for proper use of the reset button.

Posted on 3 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Citroen Berlingo?
How to reset the "Service" light on a Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To reset the "Service" light on a Citroen Berlingo, start by turning on the instrument panel without starting the vehicle. Locate the button undernea…
How to reset the service in the Citroen Berlingo van?
How to reset the service in the Citroen Berlingo van?
Citroen Berlingo (2018-2026 / MK 3) In this tutorial, we can see how to reset the service in the Citroen Berlingo van, an extremely simple and quick operation, to be carried out only on…
How to reset the service in the Citroen Berlingo van?
How to reset the service in the Citroen Berlingo van?
Citroen Berlingo (2008-2018 / MK 2) In this tutorial we can see how to reset the service on the Citroen Berlingo van, an extremely simple and quick operation, to be carried out only onc…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos