Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diagram and location of internal fuses of the Citroen C1 - Peugeot 108

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Fuse box

These brief instructions will show us the layout and positioning of the internal fuses of the Citroen C1, as well as the Peugeot 108. First, we open the front door on the driver's side and begin to locate the internal fuse box; we find it at the bottom and above the pedals, on a plastic fuse box, as shown in the video. At this point, we use the fuse layout and diagram found in the owner's manual to find the codes and amperages of each individual fuse, useful for their eventual replacement (while respecting the amperages).

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Diagram and positioning of internal fuses in the Citroen C1.
Diagram and positioning of internal fuses in the Citroen C1.
Citroen C1 (2014-2022 / MK 2) .. diagram for the Citroen C1, as well as for the Peugeot 108. First, we get into the car and start by removing the plastic cover on the side of the dashboard,.. …
Replacing the Cabin Air Filter in Citroen C1, Peugeot 108 and Toyota Aygo
Citroen C1 (2014-2022 / MK 2) .. the Citroen C1 (the operation is similar for the Peugeot 108 and Toyota Aygo), position the car on a ramp or flat surface to work safely. Now, locate.. …
Replacement of the starter motor of the Citroen C1 - Peugeot 108
Replacement of the starter motor of the Citroen C1 - Peugeot 108
Citroen C1 (2014-2022 / MK 2) .. starter motor of the Citroen C1, as well as the Peugeot 108 and the Toyota Aygo. First, we open the car's hood and start by disconnecting the battery;.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos