Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the door hinge of the Citroen C3 FN

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car door

See other generations:
Video tutorial

To replace the hinge that locks the door of the Citroen C3, start by unscrewing the three screws that hold the panel in place, detach it and remove it. Using a T40 torx key, unscrew the hinge bolt on the door frame and with a 9mm socket wrench, unscrew the two screws on the door.

Using an opening under the speaker, remove the old hinge and insert the new one: an operation that requires some manual skill and patience.

Screw the bolt onto the door frame and then the two screws on the door, reattach the panel and secure it with its three screws.


Posted on 25 December 2024 by ScegliAuto


Related tutorials

Disassembly and replacement of the wheel with the spare one on the Citroen C3.
Disassembly and replacement of the wheel with the spare one on the Citroen C3.
Citroen C3 (2009-2016 / SC) Today's instructions will allow us to disassemble and replace the wheel with the spare one on the Citroen C3. First, we open the rear hatch of the tr…
How do you replace the diesel filter of the Citroën C3?
How do you replace the diesel filter of the Citroën C3?
Citroen C3 (2009-2016 / SC) To replace the fuel filter on the Citroën C3, you need to open the hood to locate the filter box, which will be found in the upper left part compared…
How to Remove the Door Panel of a 2007 Citroen C3
How to Remove the Door Panel of a 2007 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Removing the door panel of a 2007 Citroen C3 follows a procedure that can be done independently. First, open the door and then proceed to remove the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos