Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the standard radio of the Citroen Jumper

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

See other generations:
Video tutorial

In this guide, we will see the information that will allow us to disassemble and replace the standard radio of the Citroen Jumper. First, we get on board the vehicle and start removing the radio and the standard multimedia system using the appropriate extraction tools; then we disconnect the electrical wiring at the back, as shown in the video.

At this point, we install the new radio with a compatible multimedia system, making the necessary modifications if needed; then we verify its correct operation, following the video tutorial until the end!


Posted on 19 January 2025 by ScegliAuto


Related tutorials

How to Remove the Radio from a Citroen Jumper Van?
How to Remove the Radio from a Citroen Jumper Van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial, see how to remove the radio from a Citroen Jumper van, a very simple and quick operation. First, ensure the key is not inserted for…
Removing the Car Radio on Citroen Jumper - Peugeot Boxer - Fiat Ducato
Removing the Car Radio on Citroen Jumper - Peugeot Boxer - Fiat Ducato
Citroen Jumper (2014-2024 / MK 3) In today's video tutorial, you will see how to remove and replace the original car radio with an Android unit on a Citroen Jumper, as well as on a Pe…
Removing the Radio from a Citroen Jumper
Removing the Radio from a Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) Insert the release keys into the holes on the plastic trim of the stereo, then pull the stereo towards you as shown in the video. Carefully extract t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos