Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Citroen Jumper

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Car stereo

Insert the release keys into the holes on the plastic trim of the stereo, then pull the stereo towards you as shown in the video. Carefully extract the radio, being mindful of the various wiring (disconnect the power connectors and the antenna cable). Fit the original radio or a generic brand using the appropriate adapter for the input and connector connections. Remove the upper plastics above the radio if you wish to install a navigation system (use an adapter with a plastic frame for installation).

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Air Filter on Citroen Jumper
Replacing Air Filter on Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) How to remove the air filter from a Citroen Jumper? Let’s look at removing the filter located in the engine bay. Lift the front bonnet of the Jumper,…
Where is the OBD2 port located on the Citroen Jumper?
Where is the OBD2 port located on the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) If you are curious to find out where the OBD2 port is located in your Citroen Jumper, all you need to do is carefully read the steps described in the…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos